Commercial Maintenance Plans

Creating a maintenance plan unique to your business and cooling system is vital to their overall cost and energy efficiency. Kolda has extensive experience in creating tailored strategies for a range of small to large companies across South-East QLD and has available support 24/7!

Prompt Site Visit

Once you reach out to us, our reliable team will be in contact to organise a site visit as soon as possible. We are very flexible with our availability and can adapt to your schedule as needed.

Transparent Pricing

Your assigned technician will assess your new or existing system in person so we can provide trusted advice and an accurate maintenance plan design and quote.

Customer Support

Kolda is available 24/7 for any questions or concerns you may have before, during or after the maintenance plan is put in place.

Quality Workmanship

We promise to deliver quality work on time, every time. You can depend on Kolda not to muck around when it comes to getting the job done right.

Is your AC unit not working?
Keep cool & call Kolda!

Commercial AC Maintenance Plans

Our commercial AC maintenance plans will help to improve the overall air quality and lifecycle of your AC system. We check everything from A-Z to ensure your commercial space is kept safe, healthy and comfortable all year round. The following list may vary between split system and ducted AC systems, but you can trust that we will advise you of what your system’s service plan should involve.

Kolda’s Service Checklist

  1. Check and clean air handler filters. Any replacement filters would be quoted as necessary.
  2. Check for adequate refrigerant charge.
  3. Examine the condenser and clean if necessary.
  4. Lubricate condenser fan motor.
  5. Inspect condenser fan blades for tightness.
  6. Tighten electrical connections at equipment.
  7. Check voltage at unit under load.
  8. Examine condensate drain for any blockages. Clean as necessary.
  9. Inspect the blower belt’s condition, tension and alignment.
  10. Lubricate all bearings where applicable.
  11. Ensure the blower is clean.
  12. Inspect all safety controls and contactor points.
  13. Assess and clean the thermostat.
  14. Confirm lockout controls are in working condition.
  15. Survey evaporator coil cleanliness.
  16. Inspect the starting and running capacitors.
  17. Check for any abnormal vibration and noise.
  18. Inspect relays.
  19. Assess and record the running and starting amperages.
  20. Assess and record the suction and discharge pressures.
  21. Make repair recommendations if necessary.

Maintaining Your Commercial Fridges & Cold Rooms

Regular maintenance of your commercial fridge or cold room allows you to spot potential problems well before they can impact your business. It also ensures your refrigeration system is running efficiently and reduces energy costs.

Scheduled Maintenance

Most fridges and cold rooms are required to run 24/7 all year long. So it’s essential that you don’t get stingy with your maintenance plan. Kolda can design and supply a tailored maintenance plan for your refrigeration system – whether we installed the original product or not. We understand how important it is that breakdowns are avoided at all costs and aim to provide affordable, quality service, every time.

24/7 breakdown Service

If your cold room or commercial fridge has stopped cooling, rest assured we can be there any time of the day or night to help get your cold room back up and running as soon as possible to help avoid costly loss of stock. Call us any time and one of our qualified technicians will be available to help get your equipment running efficiently again.

Frequently Asked Questions About Commercial Fridges & Cold Rooms

There are a number of reasons this could be the case. Blocked condensers, mechanical failure, seals needing replacement. It could also be due to a poorly located or low-quality thermostat failing to sense the room temperature. To properly identify the problem, it’s best to get a professional to come have a look. The Kolda team is available to come out 24/7 and get your cooling systems back to normal.

Possibly fan motor or bearings. Best to turn the fridge off and relocate stock to another fridge and book in a service appointment to get on of our techs to inspect and diagnose the issue

Blocked condensers can contribute to fridges not holding temperature. Book in a service appointment for us to inspect and service the unit.

Yes, our services are fixed price but we do offer discounts where there are multiple units in the one location/property.

Book a service appointment so one of our technicians can attend the site to inspect and diagnose the issue. We can then provide you with repair or replacement cost options to decide which option best suits you.

Yes we have a 24/7 call out team but there are after hours rates associated with this. Call our team for more info.